Skills · Docking
45/45 Docking Approach
How I bring a 22-foot sailboat into its slip with two 45-degree turns and a spring line that stops the boat, with crew or solo.
Play video: Docking a Small Sailboat Using the 45/45 Method (Real On-Water Demo)Watch on YouTube: Docking a Small Sailboat Using the 45/45 Method (Real On-Water Demo)
The 45/45 method makes docking simple and low stress. In the video, I bring a 22-foot boat into slip 10 at Holiday Marina on Lake Lanier, with the port side going against the finger pier and another boat in the slip to starboard.
Steps
- Before the approach, know which side goes against the finger pier. Put a fender out on the side facing the boat next to you; the pier side doesn't need one.
- Check the wind. Know whether it will blow you into the slip or you will be fighting it. With the wind pushing you in, as on my port beam in the video, you need less speed.
- Come down the fairway at a moderate pace, not too fast and not too slow, and look for your slip number.
- About three or four slips before yours, turn 45 degrees and point at the end of your finger pier. With the wind blowing you in, you can point a little away from it.
- Idle forward. When you can see down into the slip, shift to neutral and turn another 45 degrees, so you are pointing straight in.
- Put the spring line on. It stays at the dock, already measured, and stops the boat from going too far into the slip. With the engine in forward, it holds the boat against the pier.
- Tie the stern line to the stern cleat with a cleat hitch, tie off the tiller, then grab the bow line and put it on the bow cleat.
Tips
- Keep a boat hook on hand for the dock lines that are already on the dock. You may not need it.
- Solo, I take the spring line around a winch. With the engine in forward, it pins the boat to the pier while I tie up the rest.