Skills · Knots
Round Turn and Two Half Hitches
How to tie a round turn and two half hitches to hang a fender from a lifeline, from behind with the fender outside the boat, and from the front as the ASA 101 book shows it.
Play video: Round Turn and Two Half Hitches with both front and behind orientationsWatch on YouTube: Round Turn and Two Half Hitches with both front and behind orientations
Fenders come off the boat while you are under sail; leaving them out is considered bad form. On the approach back into the marina, I put them back on, and the round turn and two half hitches is a great knot for tying a fender to the lifeline.
From behind, with the fender outside the boat
This is how I usually tie it, standing in the cockpit and reaching over the lifeline.
- Hang the fender outside the boat, so the standing end comes up behind the lifeline from where you stand.
- Take a round turn: wrap the working end around the lifeline twice. Left or right both work.
- Bring the working end down, around behind the standing end from your side, and through the loop. That is the first half hitch.
- Do it once more, the same way, for the second half hitch.
- Dress the knot: snug the half hitches up against the round turn.
From the front, as in the ASA 101 book
This is the way Sailing Made Easy, the ASA 101 book, teaches it, with the standing end in front of the lifeline. The book calls the working end the bitter end.
- Take the working end around the front of the lifeline, to the back, and all the way around again. That is the round turn.
- Cross in front of the standing end, around it, and through the loop that forms. That is the first half hitch. Snug it up.
- Do it a second time, again over the front of the standing end, for the second half hitch.
- Drop the fender over the side.
Tips
- It is the same knot either way; only the side you work from changes. Learn both.
- If you only know the front way, you end up tying the fender inside the boat, and you can't judge its height. Tied from behind with the fender already outside, you can set it where you want it, say a couple of inches off the water.